Connections
Facade Anchors & Brackets
Embedded plates, cast-in anchors, adjustable brackets and couplers for unitized and stick systems. 6063-T6 aluminum and stainless 304/316L, load tested.
Curtain Wall Hardware & Accessories
The unseen engineering that holds a facade together. Hanart supplies anchors, spider fittings, gaskets, flashings and cavity fixings — engineered, tested and batch-traceable, for our own projects or as OEM components for yours.
Load Tested & Certified
Batch Traceable
OEM / Wholesale
304/316L & 6063-T6
Product Range
Hardware systems for every facade detail
Point Supports
Spider Fittings & Point Fixings
Four-arm, two-arm and single-arm spider fittings in 316L stainless for point-supported glazing. Modular arm geometry to suit any glass corner angle.
Seals
Gaskets & Weather Seals
EPDM wedge and compression gaskets, silicone wet-seal profiles and corner sealants — formulated for UV, ozone and water resistance with 20+ year life.
Water Management
Flashings & Copings
Aluminum and stainless flashings, copings, drip edges and baffles engineered to each joint detail — drained-and-ventilated, with thermal break options.
Installation
Setting Blocks & Packers
Neoprene/EPDM setting blocks, location blocks and shim packs sized per glass edge and frame pocket, with load capacity data per block type.
Rainscreen
Cavity & Insulation Fixings
Thermally broken insulation brackets, rocket pins and sub-frame cleats for ventilated rainscreen and stone cladding cavities, with thermal bridge data.
Materials
Material selection for the corrosion environment
Hardware is where a facade fails first if materials are wrong. Hanart selects every component grade for its corrosion environment — from inland dry climates to coastal marine zones — with bimetallic isolation where dissimilar metals meet.
- Aluminum: 6063-T5/T6 extrusions and plates, anodized or powder-coated
- Stainless: 304 (inland) / 316L (coastal & marine) for anchors and fittings
- Seals: EPDM, silicone, neoprene with certified weathering data
- Fixed: galvanized or zinc-nickel steel for concealed cavity fixings
Quality Assurance
Tested, certified, traceable
Every hardware batch is load-tested, certified and batch-traceable. Test reports cover tension, shear, pull-out and fatigue as applicable — and production lots are linked to material certificates by batch number, so you can trace any component back to its raw material.
- Load test certificates per batch
- Material certificates (EN 10204 3.1) for stainless
- Batch-number traceability on every carton
- QC inspected before packing, shipped with dunnage protection
FAQ
Hardware supply questions, answered
Yes. Hanart supplies hardware and accessory components as OEM/wholesale orders to facade contractors worldwide, with material certificates, load test reports and full traceability.
Standard materials include 6063-T5/T6 aluminum extrusions and plates, 304/316L stainless steel for anchors and fittings, EPDM and silicone for gaskets and seals, and galvanized or zinc-nickel steel for concealed fixings — each selected for the corrosion environment.
Yes. Anchor and fitting load capacities are verified by calculation and testing (tension, shear, pull-out, and fatigue where required), with test reports and certificates delivered with each batch. Production lots are traceable by batch number.
Standard stock items (setting blocks, gaskets, screws) have a low minimum order. Custom-machined components require a first-off batch and are quoted per project. Contact our supply team for a quotation with your specifications.
Yes — custom hardware design is a Hanart strength. Our engineering team models, prototypes and load-tests bespoke fittings for non-standard geometries, and delivers production drawings with the batch. Ask us for a custom hardware engineering quote.
Supply hardware for your next facade project
Send your hardware schedule or drawings. We'll return a quotation with material certificates, load data and delivery program.