Aluminum Curtain Wall & Facade Supplier in Egypt
Hanart supplies curtain wall systems to Egypt's mega-projects — Cairo, the New Administrative Capital and coastal developments — engineered for desert heat, sand-laden wind and dramatic diurnal temperature swings.
Engineering for the desert and the Nile
Egypt's facade market is defined by scale: the New Administrative Capital, New Alamein, the Suez Canal corridor and Cairo's own high-rise pipeline. Facades must perform in a desert climate of extreme summer heat, high solar radiation, wind-borne sand and sharp day-night temperature swings.
Hanart engineers for these conditions — thermally broken framing with strong insulation, sand-resistant seals and joints, low-SHGC glazing to hold back heat, and coatings engineered for harsh UV environments.
As a direct export contractor, Hanart gives Egyptian developers and contractors a single facade contract spanning engineering, Shanghai fabrication, freight, erection supervision and aftercare.
Low-SHGC coated glass, coated spandrels and thermal breaks reduce cooling load in 40°C+ summers.
Dust-sealed vents, robust gaskets and pressure-equalized joints withstand wind-borne sand.
Framing and glazing detailed for sharp temperature swings without distortion or seal failure.
Fabrication capacity scaled to master-plan programs with ship-consolidated deliveries.
ECP-aligned engineering and port logistics
Facade engineering follows the Egyptian Code of Practice and applicable wind load provisions, coordinated by Hanart's engineers with local consultants to satisfy authority requirements on megaprojects where approvals are document-heavy.
Logistics route via Alexandria, Damietta or Port Said, with inland movement to Cairo and the New Administrative Capital. Hanart quotes DDP with duty and clearance included, or CIF/FOB per Egyptian contract.
| Code of practice | Egyptian Code of Practice in force |
| Wind loads | Site-specific desert wind provisions |
| Thermal | U-value and condensation control for desert climate |
| Fire | Spandrel and glazing performance per approval |
Systems we deliver in Egypt
We supply unitized curtain wall for towers, stick systems for complex forms, structural glazing for feature facades, and stone or aluminum cladding where the architecture calls for it. Feature atriums and lobbies can use point-supported glazing.
Fabrication is at the Shanghai plant with full seal testing; panels ship consolidated and numbered. Programs are typically 10–16 months from design freeze to completion, scalable for master-plan phasing.
Full as-built documentation, spares and a structured warranty complete each package.
Sourcing a curtain wall supplier in Egypt
Most Egypt facade purchases start the same way: a technical brief, shortlisted suppliers, engineering review, mock-up, fabrication and site installation. Where the chain shortens — and where the cost moves most — is keeping engineering and fabrication under one contract for Egyptian towers. Hanart runs both in its Shanghai plant, so the price approved before fabrication is the price that holds for your project.
Engineering for Egypt is prepared against Egyptian Code of Practice provisions. The central engineering team completes structural, thermal, acoustic and fire calculations to the Egyptian framework, and licensed local consultants verify the package before fabrication is released — the same discipline we apply in every export market.
Panels leave Shanghai with marine-grade packing, customs-classified documentation and numbered installation drawings, routed for Alexandria or Port Said. For Egypt we typically ship through Alexandria or Damietta on DDP or CIF terms. Erection is carried out by locally permitted crews under Hanart supervision, with a site QA plan covering setting-out, sealant works and watertightness testing suited to the Egyptian climate.
Typical briefs we price for Egypt: airport and transport terminals, office and data-centre towers, hotels and mixed-use developments, retail and education estates.
Budget, programme and risk allocation
A realistic facade budget for a Egypt high-rise splits roughly 6–10% engineering and testing, 55–70% materials and fabrication, 10–15% logistics, and 15–25% on-site labour. The mix changes with unitized versus stick-built systems and with the amount of performance testing the contract requires — both decisions we help price early for Egyptian projects.
Cross-border facade supply carries three financial risks: currency swings, duty changes and site-readiness sequencing for Cairo and Alexandria deliveries. Hanart mitigates them with fixed-price engineering-to-install packages, DDP delivery terms, and a fabrication and release schedule sequenced to installation order — not one bulk shipment.
On site, the risks are tolerances, interfaces and weather windows in a high-diurnal-range desert climate. The QA plan covers joint setting-out, drainage and sealant works, watertightness verification and a documented handover, so the facade is complete and verified before your Egyptian team takes possession.
What a single-point facade package includes
With one contract, engineering, cost, quality and schedule sit under a single point of responsibility for Egyptian towers, without hand-offs between separate suppliers. If something changes on site, it is resolved between your team and ours — one counterpart in Shanghai and one in Cairo, not three suppliers.
- Engineering and local code verification for Egypt
- Mock-up and performance testing before fabrication
- Full seal testing of every panel at the Shanghai plant
- Marine-grade packing, customs documentation and sequenced delivery
- Erection with local crews under Hanart supervision, plus QA record
- As-built drawings, maintenance manual, spares and structured warranty
Egypt facade questions, answered
Yes — supply, supply-and-erect and design-build packages for Egyptian towers and megaprojects, with ECP-aligned engineering and delivery via Alexandria, Damietta or Port Said.
Dust-rated joints and seals, low-SHGC glazing, thermal breaks and UV-stable coatings are standard design responses for Egyptian conditions.
DDP with import duty and clearance, or CIF/FOB, arranged via Alexandria or Port Said. Volumes suit consolidated shipping for master-plan programs.
10–16 months from design freeze to facade completion per tower, with parallel works to compress megaproject schedules.
Yes — full design-build including engineering, fabrication, logistics, erection and aftercare under one contract.
Building in another market too? See Hanart in Nigeria.
Local verification and approvals
Approval of imported facade systems is a project-specific process, so Hanart packages the evidence your consultants and authorities expect: Egyptian Code of Practice provisions calculations verified by a local engineer, custom-classified import documentation, and test certificates for the key performance classes. The same dossier is updated through revisions and issued in final form at handover.
For tenders, the package is prepared in the format your procurement team requires and delivered as a fixed offer — typically six to twelve weeks from technical brief to priced proposal, including logistics through Alexandria or Damietta, DDP or CIF.
Plan a facade for your Egypt project
Send your drawings and location. We'll return a system recommendation engineered for Cairo's desert climate and Egyptian energy code — with logistics via Alexandria or Port Said and a programme estimate.