Phase 1
Design Drawings
Concept and system design: elevations, indicative details, system descriptions and performance specification for approval.
Technical Drawings Library
The drawing set is the contract between design intent and built reality. Hanart engineers and issues complete design, shop and fabrication drawings for every facade system we deliver.
Design & Shop Drawings
Fabrication Drawings
BIM-Coordinated
As-Built & O&M
Drawing Sets
Every phase, fully documented
Phase 2
Shop Drawings
Coordinated with structure, slab edges, parapets and MEP interfaces. Dimensioned sections, anchorages, movement joints and schedules for consultant approval.
Phase 3
Fabrication Drawings
Panel-by-panel production content: every profile cut, hole, welding requirement, glazing size and hardware position defined for the factory.
Phase 4
Installation Drawings
Erection sequence, crane/holst plans, setting-out, temporary works and site QC checklists for each installation stage.
Phase 5
As-Built Drawings
Record drawings with all site revisions, issued with the O&M manual at handover for maintenance, warranty and future works.
BIM
BIM Models
Revit models with facade-embedded data: materials, performance, maintenance and spare part information linked to elements.
Detail Types
From slab edge to parapet
Our library covers every critical interface of the envelope. Typical detail categories available for review and use in design development:
- Horizontal & vertical section details per system
- Anchor and connection details (fixed, sliding, adjustable)
- Corner, parapet, sill & head-of-glazing details
- Slab edge fire barriers and perimeter sealing
- Movement joint and expansion details
- Glass-to-glass, fin and spider fitting details
- Drainage and weep details per climate
Quality Control
Drawings you can build from
Multi-Level Review
Every drawing passes design check, peer review, lead engineer approval and client/consultant approval workflows — with a revision log on every sheet.
BIM Coordination
IFC clash reviews with structure and MEP before shop drawings are frozen — catching penetrations and conflicts on screen, not on site.
Serial Traceability
Fabrication drawings carry panel serial numbers linked to factory QC records — every panel traceable from drawing to installation to warranty.
FAQ
Technical drawings questions, answered
Hanart issues the full drawing set for facade works: design drawings, shop drawings, fabrication drawings, installation/erection drawings and as-built drawings — covering details, sections, elevations, anchorages, interfaces and schedules per project.
Design drawings communicate the facade concept, systems and performance. Shop drawings are fabrication-ready: every profile, glass unit and fixing dimensioned for production. Hanart produces both, with approval workflows through architect and consultant.
Yes. We deliver in DWG and Revit and coordinate via IFC/BIM reviews at design milestones. Interfaces with structure, MEP, waterproofing and other packages are captured in coordinated drawings.
Yes. As-built drawings are issued with the operation & maintenance manual at handover, including all revisions, material schedules and guarantee documentation — essential for future maintenance and warranty claims.
Yes. Our drawing office works to the project's governing standards — BS 8118/EN 13830, ASTM, IS codes or local equivalents — and formats sheets, symbology and approval workflows to client requirements.
Review our drawing capability on your project
Share your facade scope and we'll show the drawing deliverable schedule, sample details and BIM approach for your project.