Curtain Wall & Facade Supplier in Bangladesh
Hanart supplies curtain walls for Bangladesh's growing skyline — Dhaka office towers, Chattogram commercial projects — engineered for monsoon rain, river-valley humidity and intense tropical solar gain.
Engineering for the Bengal delta climate
Bangladesh's facade market is led by Dhaka and Chattogram, with high-rise office, hotel and residential towers driving demand for quality enclosures. The climate is dominated by the monsoon — heavy seasonal rain, sustained humidity and, in coastal zones, cyclone risk — plus intense solar gain.
Hanart engineers facades that stay dry and cool under these conditions: pressure-equalized watertight details, low-SHG glazing, and corrosion protection suited to the humid, partially coastal country.
As a direct Chinese facade contractor, Hanart offers Bangladeshi developers and contractors transparent pricing with a single contract covering engineering, fabrication, logistics and erection supervision.
Watertight tested to high differential pressure; drained and ventilated cavity design for heavy seasonal rain.
Ventilated spandrels and rainscreen cavities prevent condensation problems in high-humidity months.
Low-SHGC coated glass reduces cooling load in Dhaka's hot, humid climate.
Direct factory supply from Shanghai with documented quality — competitive total cost for developers.
Code alignment and import support
Facade engineering follows the Bangladesh National Building Code and applicable wind and structural provisions, coordinated by Hanart's engineers with local consultants to satisfy approval requirements.
Logistics route via Chattogram (Chittagong) port, with Dhaka site delivery by truck. Hanart offers DDP including import duty and clearance, or CIF/FOB per contract preference.
| Building code | Bangladesh National Building Code provisions |
| Wind & cyclone | Site-specific wind provisions, coastal cyclone zones |
| Fire | Compartmentation and glazing fire performance per approval |
| Glazing | Laminated / tempered coated glass per specification |
Systems we deliver in Bangladesh
Typical scopes: unitized curtain wall for high-rise towers, stick systems and window wall for commercial buildings, aluminum cladding for feature elevations, and point-supported glazing for atriums and entrances.
Fabrication is at the Shanghai plant with full seal testing; panels ship packed and numbered via Chattogram. Programmes run 10–16 months from design freeze to completion.
Documentation, spares, maintenance manuals and a structured warranty complete every package.
Sourcing a curtain wall supplier in Bangladesh
Most Bangladesh facade purchases start the same way: a technical brief, shortlisted suppliers, engineering review, mock-up, fabrication and site installation. Where the chain shortens — and the cost moves most — is keeping engineering and fabrication under one contract, which is how Dhaka projects lock the approved price. Both happen at our Shanghai plant, so the price approved before fabrication is the price that holds for your Dhaka project.
Engineering for Bangladesh is prepared against Bangladesh National Building Code provisions. Structural, thermal, acoustic and fire calculations are completed by our central team against BNBC provisions, and licensed local consultants verify the package before fabrication is released.
Panels leave Shanghai with marine-grade packing, customs-classified documentation and numbered installation drawings, routed for Chattogram. For Bangladesh we typically ship through Chattogram port on DDP or CIF terms. Erection is carried out by locally permitted crews under Hanart supervision, with a site QA plan covering setting-out, sealant works and watertightness testing for Dhaka conditions.
Typical briefs we price for Bangladesh: airport and transport terminals, office and data-centre towers, hotels and mixed-use developments, retail and education estates.
Facade budgets, programmes and risk for Dhaka high-rises
A realistic facade budget for a Bangladesh high-rise splits roughly 6–10% engineering and testing, 55–70% materials and fabrication, 10–15% logistics, and 15–25% on-site labour. The mix changes with unitized versus stick-built systems and the performance-testing regime required — both are priced early for Dhaka towers.
Cross-border facade supply concentrates three financial risks for Bangladeshi developers: currency movement, duty changes and site-readiness sequencing. Hanart mitigates them with fixed-price engineering-to-install packages where possible, DDP delivery via Chattogram, and a fabrication sequence matched to installation order rather than one bulk shipment.
On site, tolerances, interfaces and monsoon weather windows carry the risk. The QA plan verifies joint setting-out, drainage, sealant and watertightness, and delivers the documented record before your team takes possession.
What one facade contract includes for Bangladeshi developers
A single contract gives one point of responsibility for engineering, cost, quality and schedule. If conditions change on site, the fix is agreed between your team and one accountable partner — no relay through multiple vendors.
- Engineering and local code verification for Bangladesh
- Mock-up and performance testing before fabrication begins
- Full seal testing of all panels at the Shanghai plant
- Marine-grade packing, customs documentation and sequenced delivery via Chattogram
- Erection with local crews under Hanart supervision and full QA records
- As-built documentation, maintenance guide, spares and structured warranty
Bangladesh facade questions, answered
Yes — supply-only, supply-and-erect and design-build packages, engineered to the Bangladesh National Building Code, fabricated in Shanghai and delivered via Chattogram.
Facades use pressure-equalized joints, drained and ventilated cavities and high watertightness test classes, so heavy seasonal rain is managed without leaks.
DDP including import duty and clearance, or CIF/FOB per your preference. Containers discharge at Chattogram and truck to Dhaka sites.
10–16 months from design freeze to facade completion, depending on tower height, area and system type.
Yes, supply-only is standard — full engineering, fabrication and documentation for installation by your contractor.
Looking beyond Bangladesh for facades? See Hanart in India · Pakistan · Kazakhstan.
Local verification and approvals for Bangladeshi projects
Approval of imported facade systems is a project-specific process, so Hanart packages the evidence your consultants and authorities expect: Bangladesh National Building Code provisions calculations verified by a local engineer, custom-classified import documentation, and test certificates for the key performance classes. The same dossier is updated through revisions and issued in final form at handover, so the Dhaka approval record is complete.
For tenders, the package is prepared in the format your procurement team requires and delivered as a fixed offer — typically six to twelve weeks from technical brief to priced proposal, including logistics through Chattogram port, DDP or CIF.
Plan a facade for your Bangladesh project
Send your drawings and location. You'll get a system recommendation engineered for Bangladeshi wind, rain and energy code — with logistics via Chattogram and a programme estimate.