Kazakhstan
Almaty and Astana drive commercial and hospitality construction — cold-winter glass systems and unitized towers for a fast-growing skyline.
Aluminum Facade & Curtain Wall Supplier in Central Asia
The urban boom from Almaty to Tashkent is building upward — and outward. Hanart engineers curtain walls and cladding for Central Asia's continental climate, seismic zones and fast-track programs.
−40°C to +40°C Design Range
Seismic Detailing
Cold-Climate Glazing
China→Site Delivery
Markets
Where we deliver in Central Asia
Uzbekistan
Tashkent and Samarkand are investing fast in offices, hotels and transit hubs — value-engineered envelopes on ambitious programs.
Kyrgyzstan & Tajikistan
High-altitude, high-seismic markets where structural glass and slip-joint detailing must satisfy the strictest codes of the region.
Climate Engineering
Designing for -40°C to +40°C
Deep Thermal Breaks
Frames with wide polyamide thermal breaks and warm-edge glazing cut U-values to 1.0 W/m²·K and below — the difference between a comfortable winter and a frost-cracked seal.
Condensation Control
Cold-climate projects get hygrothermal analysis: dew-point position inside the wall, vapor barriers placed correctly, and drainage paths that never freeze shut.
Extreme Cycling Gaskets
Seals and gaskets are specified for temperature cycling far beyond coastal China norms — compression-set tests at design extremes are part of our material QA.
Snow & Wind Regimes
Roof snow loads and cold-winter wind pressures drive different section sizing than tropical markets — structural calcs follow the local climatic data, not a template.
Seismic Performance
Facades that move with the structure
Significant parts of Central Asia are high-seismic. Hanart engineers unitized rotational joints that allow inter-storey drift without glass breakage, slip connections at anchors, and tolerance systems documented to local seismic codes.
- Inter-storey drift accommodation up to code demands
- Rotational joint systems for unitized towers
- Slip anchors for stick built grids
- Fragility review: glass and panel fallout risk minimized
Delivery Model
How we deliver to Central Asia
- Feasibility — climate and seismic data review, system selection, cost model
- Fabrication — Chinese factory production with full QC and batch testing
- Logistics — packing, customs and transport engineered for land and sea routes
- Installation — Hanart engineers supervise local crews; inspection to local codes
- Aftercare — annual inspection and sealant programs agreed at handover
FAQ
Central Asia facade questions, answered
We deliver facade packages across Kazakhstan, Uzbekistan, Kyrgyzstan, Tajikistan and Turkmenistan — with priority markets in Almaty, Astana, Tashkent and Samarkand where commercial and hospitality construction is on strong growth paths.
The continental climate ranges from -40°C winters to +40°C summers. Facades need deep thermal-break frames, low U-values, condensation control and gaskets rated for extreme temperature cycling — plus snow and wind regimes that differ sharply from China's coastal climates.
Yes — significant parts of Kyrgyzstan, Tajikistan and eastern Kazakhstan sit in high seismic zones. We engineer unitized rotational joints and slip connections for inter-storey drift, sizing anchors and tolerances to local seismic codes.
Our standard delivery model: Chinese fabrication and factory QC, packed and shipped to site, with our engineers supervising local installation crews and completing inspection and testing to local codes. For large programs we can also support local prefabrication.
Country profiles: Kazakhstan
Planning a facade project in Central Asia?
Send your location, climate and seismic requirements. We'll confirm system suitability and return scope and budget within 7 working days.