Aluminum Curtain Wall & Facade Supplier in the Philippines
Hanart supplies curtain wall systems to the Philippines — Metro Manila, Cebu and Clark — engineered to NSCP typhoon provisions with 250+ km/h gust capacity, high seismic zones and marine corrosion protection.
Engineering for the world's strongest typhoons
The Philippine facade market is anchored by Metro Manila and Cebu, with high-rise residential, office and hospitality work plus the Clark and Luzon corridor expansion. No market in the region demands more of an envelope: super-typhoons with 250+ km/h gusts, high seismic accelerations and a fully marine environment.
Hanart engineers every Philippine project to the NSCP typhoon provisions — sizing frames and glazing for the design gust, requiring impact-resistant glazing in wind-borne debris zones, and testing watertightness to extreme pressure classes.
A direct contract with Hanart brings the factory strength and documented testing trail of a top-50 Chinese contractor to bullish Philippine developers.
Frames and glazing sized to NSCP typhoon provisions with 250+ km/h gust capacity.
Laminated glass configured for wind-borne debris zones per code.
Ductile brackets for high seismic zones plus full marine corrosion isolation.
Watertightness validated to extreme differential pressure classes.
NSCP-aligned engineering and Manila logistics
Facade engineering follows the National Structural Code of the Philippines, including typhoon wind provisions, seismic design and glazing impact requirements, with local consultant coordination for authority review in Metro Manila cities.
Logistics route via Manila International Container Terminal (MICT), plus Cebu and Subic options. DDP with duty and clearance included, or CIF/FOB per contract.
| Structural code | NSCP typhoon and seismic provisions |
| Wind debris | Impact-resistant glazing per code zones |
| Watertightness | Tested to extreme pressure classes |
| Fire | Spandrel and glazing performance per approval |
Systems we deliver in the Philippines
Unitized curtain wall for high-rise residential and mixed-use towers, stick systems for complex forms, and window wall for hospitality. Feature lobbies can use point-supported glazing engineered for typhoon loads.
Fabrication at the Shanghai plant with full seal testing; panels ship via MICT packed and numbered. Programs run 10–16 months from design freeze to completion for a Manila tower.
Full documentation, spares, manuals and structured warranty complete each package.
Sourcing a curtain wall supplier in Philippines
Most Philippines facade purchases start the same way: a technical brief, shortlisted suppliers, engineering review, mock-up, fabrication and site installation. Where the chain shortens — and the cost moves most — is keeping engineering and fabrication under one contract, which is how Manila projects lock the approved price. Both happen at our Shanghai plant, so the price approved before fabrication is the price that holds for your Manila project.
Engineering for Philippines is prepared against NSCP typhoon and seismic provisions. Our central engineering team completes structural, thermal, acoustic and fire calculations against NSCP provisions, and licensed local consultants verify the package before fabrication is released.
Panels leave Shanghai with marine-grade packing, customs-classified documentation and numbered installation drawings, routed for Manila MICT. For Philippines we typically ship through Manila MICT on DDP or CIF terms. Erection is carried out by locally permitted crews under Hanart supervision, with a site QA plan covering setting-out, sealant works and watertightness testing for Manila conditions.
Typical briefs we price for Philippines: airport and transport terminals, office and data-centre towers, hotels and mixed-use developments, retail and education estates.
Facade budgets, programmes and risk for Manila high-rises
A realistic facade budget for a Philippines high-rise splits roughly 6–10% engineering and testing, 55–70% materials and fabrication, 10–15% logistics, and 15–25% on-site labour. The mix shifts with unitized versus stick-built systems and the testing regime required — decisions we price early for Manila projects.
Cross-border facade supply brings three financial risks to Philippine projects: currency movement, duty changes and site-readiness sequencing. Hanart mitigates them with fixed engineering-to-install pricing where scope allows, DDP terms via Manila MICT, and fabrication sequenced to installation order instead of one bulk shipment.
On site, tolerances, interfaces and typhoon weather windows carry the risk. The QA plan runs from joint setting-out through drainage, sealant and watertightness verification, closing with a documented handover before possession is taken.
What a single-point facade package includes for Philippine towers
The value of one contract is a single point of responsibility for engineering, cost, quality and schedule. Changes on site are settled directly between your team and ours through one contract — typhoon-season sequencing included.
- Engineering and local code verification for Philippines
- Mock-up build with performance testing before fabrication
- Complete seal testing of each panel at the Shanghai plant
- Marine-grade packing, customs documentation and sequenced delivery through Manila MICT
- Erection by local crews under Hanart supervision with a QA record
- Close-out drawings, maintenance manual, spares and a structured warranty
Philippines facade questions, answered
Yes — supply, supply-and-erect and design-build packages, NSCP-aligned engineering and delivery via Manila MICT, Cebu or Subic.
Frames and glazing are engineered to NSCP typhoon provisions, with impact-resistant glazing in wind-borne debris zones and extreme watertightness classes.
DDP including import duty and clearance to Philippine ports, or CIF/FOB. Documentation and duty are planned before shipment.
Yes — engineering documents are prepared with local consultant coordination for Metro Manila authority review.
10–16 months from design freeze to facade completion, depending on tower scale and complexity.
Local verification and approvals for Philippine projects
Approval of imported facade systems is a project-specific process, so Hanart packages the evidence your consultants and authorities expect: NSCP typhoon and seismic provisions calculations verified by a local engineer, custom-classified import documentation, and test certificates for the key performance classes. The same dossier is updated through revisions and issued in final form at handover, so the Manila approval record is complete.
For tenders, the package is prepared in the format your procurement team requires and delivered as a fixed offer — typically six to twelve weeks from technical brief to priced proposal, including logistics through Manila MICT, DDP or CIF.
Plan a facade for your Philippines project
Send your drawings and location. You'll get a system recommendation engineered for Philippine wind, rain and energy code under NSCP provisions — with logistics via Manila MICT and a programme estimate.